Hand held Fiber Inspection Microscopes
*Fiber Inspection microscopes are equipped with potent laser safety filters. It will decrease
the dangerous risks to the users. It’s widely used in the field such as communication, Fiber
wire and so on. it’ s one of the indispensability inspection equipments .
The 200X and 400X Fiber Microscopes are used for inspecting fiber terminations in the
field. With their good optical performance and integrated laser safety filters, they provide the
most critical view of fiber end faces. This renders scratches highly visible and is the clear
choice for field termination in sensitive installations.
OL-Series Hand Held Fiber Microscope
This lightening method provides a clear view of core
condition and cleanliness. The light from the white LED
hits the end-face at an angle, making the core clearly
visible and allowing the user to readily see any surface
debris or contamination. The amount of scratches seen
on the ferrule is limited, allowing technicians to polish
to a low loss level without wasting time over-polishing
200x Image with Oblique Illumination
200x Image with Coaxial Illumination
CL-Series Hand Held Fiber Microscope
Light is introduced into the optical path (axis) so that it
comes out the tip of the objective and strikes the
sample perpendicular to the fiber end-face. It produces
excellent detail of scratches and contamination. For
critical examination of polish quality, we strongly
recommend the CL-Series Hand Held fiber
How to choose between the OL-Series and the CL-Series?
Both series of our Hand Held Fiber Microscope (OL-Series and CL-Series) provide excellent
views of the ferrule end face. We recommend 400x magnification for single-mode and 200x
magnification for multi-mode:
(1)If you frequently terminate fiber and have received professional training, you are probably
best served by our CL-Series microscope.
(2)If you only occasionally terminate fiber, and are unsure, you might consider the OL-Series.
(Sample picture, the exact appearance based on what you see)
Model list: FMC CL-200, FMC CL-400
1.Power Source: 3 X AAA batteries
Light Source: white LED, rated for 100,000 hours
Weight: 0.5 Kg
Size: 225mmL X 32mm diameter, 8.76” x 1.25” diameter
Controls: Fine Focus control wheel
Switch: 1.Momentary on/off switch for light source.
2. Two minutes delayed on/off switch
Safety Filter: Built in IR filter
Adapter Interface: interchangeable universal slip grip tips, or dedicated connector type.
Color: Black. Or Sliver